The majority of high-end smartphones come with some form of water resistance. The latest iPhone models can be submerged to as deep as six meters. However, internal components remain sensitive to water and can be damaged if submerged for too long.
Did you drop water on your phone or even into the water? It happens to many of us. Today, water-resistant devices are more sought-after than ever before, but they’re not waterproof from water-related damage. Particularly, when the charging port is wet, any device could fail. So, let’s dive into ways How To Get Water Out Of The Charging Port?
If you’re unsure how the water got into your charging port, many phones will give you a warning alert. There are simple ways to ensure that your phone or tablet dries as quickly as possible.
If you’ve found water in the charging port of your laptop, phone, gaming console, or any other device, you’ll need to remove it quickly.
How To Get Water Out Of The Charging Port: Step-by-Step
There are many methods of taking water out of the charging port floating around the internet. Many of them could result in more harm to the equipment.
This step-by-step method, however, is the safest method for removing water from a charging port and is recommended by both Apple (If you see a liquid-detection alert on your iPhone–Apple Support) and Samsung (Moisture is stored in the water-resistant Samsung phones or tablets’ charge port).
- Dry the outside of the device using a clean cloth or a microfiber towel.
- Shake and tap or shake the unit using the port side facing down to drain larger water droplets from the port.
- Place the device flat with the display facing down in a room that is well ventilated and allows it to dry naturally.
- Based on the amount of humidity in the harbor, this can take anything between 30 minutes to several hours.
What NOT To Do To Take Water From The Charging Port
Once you have figured out the best method to remove the water from a charging port, what are the other options you’ve been told about?
Although some strategies appear to be sensible or have been reported to be efficient, they also have the potential to cause greater problems than they resolve.
- Do not inflate the ports with air. Injecting air into the port could result in moisture getting deeper inside the port. The compressed air also could add more moisture to the port due to the cold the compressed air is once it is spraying. As the cold air cools, it condenses, which produces moisture.
- Do not use heat. Although many devices are resistant to a certain degree, certain components like the battery, screen, and seals are particularly susceptible to heat. Utilizing heat to dry out water inside the port could cause damage to the port and components, so avoid appliances and hair dryers.
- Do not stick any items in the port. It’s not just cotton swabs, tissue paper, paper towels, or any other item that can work. Injecting anything into the port may leave debris behind or harm the connection points within the port for charging.
- Do not place your device inside the rice bag. Rice is the ultimate solution to removing moisture from devices. It’s widely accepted that it’s used in commercials and TV shows. Although it is a sound method in principle, it could result in more harm. While rice can absorb moisture, it creates fine particles that can cause damage to your phone.
- Do not make use of alcohol isopropyl. Isopropyl Alcohol is diluted with water, so you’d be adding humidity to the gadget. Additionally, isopropyl alcohol can be extremely conductive and can carry electrical charges produced from the devices.
What If My Smartphone Is Waterproof?
The majority of smartphones sold today are waterproof.
However, being water-resistant does not mean that your phone isn’t susceptible to suffering from water damage. Water-resistant phones aren’t waterproof.
The metal components in your phone could continue to corrode and stop working correctly if they come into contact with liquids of any type.
It’s the same for the metal pins in the charging port.
Without any electrical current flowing through these pins made of metal, The liquid shouldn’t do any permanent harm (unless it leaves a residue over these posts).
This is why your phone automatically shuts off the charging connector whenever it detects liquid inside it.
A current of electricity could cause the metal to rust and the connector strip ceases to function.
The Signs Of Water Damage
The devices may exhibit indications and signs of water damage that go beyond any water that is present in the charger port.
- Your device won’t start up. This one seems pretty obvious; however, when your device isn’t running at full power despite being fully charged, it could be affected by water damage.
- The device is heating up. If a lithium-ion battery suffers damage, like water damage, the device may be very hot.
- Applications don’t load or remain in. If your device does not load applications, or if programs like the flashlight are on despite efforts to turn them off, you could have water damage.
- The speakers aren’t working. Speakers that will not make sound or microphones that fail to receive sound could be damaged by water.
- There is a fog beneath the display. Fog or water droplets on the screen suggest that moisture has accumulated inside the device.
- The device isn’t able to recognize the SIM card or isn’t able to connect to the access. A device with water damage might not be capable of reading the SIM card or connecting to the cell network.
If your smartphone‘s charging port is soaked, don’t be alarmed. Here’s how to handle it:
- Dry your phone using the help of a towel
- Make sure your phone is turned off.
- Take out from the SIM cards and batteries if they are applicable.
- Make sure to tap the phone lightly using your palm to release water from the port for charging.
- Place your phone inside a sock, then blow cool air through the phone.
After 3 hours, the phone’s charging port should be completely dry!
Do not use cat litter rice, silica gel packets, or any other heat source. Drying methods that use heat don’t perform well and often result in further harm to your phone.
I strongly recommend not using this Emergency Override option if it’s not an emergency. Charging your phone while the port is wet may result in permanent harm.
The best option is to wait for your smartphone to completely dry. Be patient!