For those who might not be acquainted with the Insignia brand, Insignia is essentially the value-for-money company that is the most popular choice for intelligent TV requirements. But don’t allow the fact that they’re a low-cost brand to ruin the image you have of Insignia.
The only thing low-cost about these TVs is the price cost. Apart from that, the fact is that there’s not that much distinction between them and a standard Samsung. Thus, you’ve got a high-end piece of technology at a fraction of the price.
Here is a complete guide on How To Fix Insignia Fire TV Black Screen?
In light of this, and perhaps it is the case that Insignia is Best Buy’s flagship brand, these televisions have recently gained massive popularity.
Furthermore, since it’s produced by a large company with a strong reputation, there is generally nothing to worry about in terms of quality. But this doesn’t mean that everything will function flawlessly for the duration of time.
Sometimes it’s inevitable that one component or another can fail the team, which causes your TV to “break.” In the case of the problem you’re currently dealing with, the blank screen issue might not be as bad.
Instead of saying that the TV is broken, let’s run through the steps to troubleshoot it yourself. It’s quick and can provide you with a good chance of fixing your TV on your own instead of needing to call experts. Let’s get in it!
Why Is My Insignia TV Screen Black?
Are you experiencing issues with your Insignia Fire TV showing a black screen? If you’re experiencing it, don’t panic; it’s a common problem with Insignia TVs with Fire TV editions.
We immediately attribute the Insignia Fire TV’s light issue to a hardware malfunction; however, this isn’t always the scenario. There’s a strong chance that the problem resulted from minor software bugs or conflicts with the internal settings.
If you notice that the Insignia Fire TV appears to show no picture, it’s likely due to an issue with the HDMI cable or a problem with your internal setting. It is best to perform a hard reset of your TV and check the wires to fix the issue.
The solution usually solves the issue, allowing users to return using your TV. There are occasions when we cannot fix the problem; therefore, I’ve developed this comprehensive tutorial to simplify the process.
If your Insignia fire TV does not show any images, It could be due to:
1. Power Supply Board Failure
A problem with the board that powers the TV is usually the leading cause of a blank TV screen. Televisions typically contain more than just the power supply board, which is attached to the T-con board, and various other components inside.
The TV is connected to an external power source, allowing you to know the source of the problem. The power source. If it is working, it isn’t related to the TV but its power source.
2. Backlight Error
This is the first thing you should check to determine the likelihood of a malfunctioning backlight. The fastest and easiest procedure is to turn on the screen of your computer and hold a flashlight close to it and check whether you can see the image.
The image will appear incredibly dark if the screen’s brightness has been turned down to its lowest setting. If the screen is entirely opaque, it could be required to shine a bright light directly onto the screen; however, you’ll still be able to hear the audio.
If an image is visible on the screen, the screen’s light element is failing. Since televisions from Insignia are self-contained units with only small parts that can be changed, the issue will require the replacement of the entire screen. The cost of replacing your television will be lower than replacing the screen.
3. TV Panel Issue
The LED panels in television screens comprise light-emitting diodes. Contemporary LED panels are constructed on a light-emitting diode smaller than the pin’s head, making them smaller.
If the tv’s panel is damaged, the quality of images on your screen could be affected, or you’ll be unable to see images displayed on your display. Some people have their television panels repaired; others may be less costly to buy a new TV set.
You can find out how much it would cost to replace your TV’s panel and then have someone fix it for you instead of buying a new television.
4. Bad Connections
If the TV’s screen turns black, but the sound plays, it could result in several issues based on your TV model.
In certain instances, there are instances where the problems that result from smart devices can be unpredictable, as they could be factory-related, technical, or even simple errors like incorrect wiring.
A damaged connection or wiring can cause your TV’s display completely blank. The cords that connect to it can be checked to ensure that you have a power source and that the television and other equipment are correctly connected.
5. Sleep Timer
A sleep-in-sleep function is typically present in devices with dedicated screens, and it shuts down or off the net after a specific amount of time without use. As a result, you’re experiencing issues using your device right now.
If your device cannot receive simple commands, such as “volume down,” it will go into sleep mode. This is the reason you’re having problems at this moment. There are two kinds of auto sleep options that are available on smartphones.
Auto-sleep can have a variety of effects. One of them causes the system to be shut down and go into an indefinite hibernation state. The screen will be turned off, which is not the case for most apps running on your device.
It’s essentially the same as shutting off the computer. The main distinction is that the device can boot up faster since all the operations have been saved in the device’s memory. The sleep timer can create problems by turning it off, which could be helpful.
6. Capacitor Issue
A capacitor is a storage capacitor for electric charge, which is used to store and release electricity in precisely the amounts needed by the software.
Capacitors can be found in various kinds of television and are utilized as couplers between circuits, electronic timing components, and filters.
Capacitors are a part of every electronic device. They are used to store and transfer the charge from and to the circuit. A single capacitor that is defective could cause the whole course to come to the point of crashing.
However, it could lead to problems with black screens in the future. Therefore, resolving the issue as quickly as possible is recommended. The best method to address the point is to bring your vehicle to a reputable repair shop and have the inside components examined.
If courageous enough, you could take off the rear panel and check whether the capacitors are in good condition. Leaks or leaking capacitors must be eliminated at all costs.
How To Fix Insignia Fire TV Black Screen
For those who have read our posts before, you recognize that we begin by describing the root of the issue in the beginning. This way, should it occur again to you, it will be clear what’s going on and better resolve the matter faster.
Here’s the news! Good job for those who believed that the issue was likely to be related without power to the TV. It is expected that you are right. It will undoubtedly make the screen completely unresponsive.
However, it’s possible that the entire issue could be the result of something as small as a damaged cable or broken cable. Also, it’s possible to be using the incorrect source.
It will also produce the same effect. At the higher end of the spectrum, it could be that we’re thinking of a shorted-out component or perhaps backlit sensors. In the event of any of these situations, we’ve got solutions to address them below!
1.) Try Running An Energy Cycle On Your Insignia
While this approach may seem too simple to be successful, it’s an excellent first step in the event of issues like those.
It works well enough that IT experts often joke that they’d likely lose their job if everyone attempted this before asking for assistance. Restarting any device is great for giving it a well-needed relaxation.
Take a look at it this way These devices are usually on standby or active on standby for months. A few hours of rest can make a massive difference in most instances. In addition, power cycles are excellent for eliminating bugs that accumulate over time.
Power cycle running is an easy task; however, you can’t perform it using your remote. To fully enjoy the advantages of a power cycle, you’ll have to disconnect the TV completely to ensure that no power will be inserted into it.
All you have to do is to let it remain like that for a few minutes. After that, connect it in and determine if it’s working the way it should. If it’s working, great. If not, it’s time to move to what’s next.
2) Make Sure You’re Using The Correct Source
The next step is quite simple. But, it is logical to look these things up before we conclude that the issue is much more complicated than we imagined.
All you need to do is ensure that you’re using the correct source or output. If not, there’s an opportunity that you’re in a state of utter oblivion, staring at a blank screen as the action is taking place elsewhere.
To ensure that everything is covered, we’d suggest using another source.
If you only have that input source you’ve used, the issue isn’t too big and easily resolvable with a different. If you’re lucky, you will find that this was the reason for your issue. If not, it’s time to step up your game.
3.) Check All Of Your Cables
Most of the time, when you’ve been through this, your issue is likely to have something to have to do with your cables. If you find that any cable or cables are not correctly connected or twisted, they won’t be able to transmit the right amount of a signal for any significant result.
In this case, it will result in a blank screen. This is what you will see. Therefore, to eliminate the possibility of this happening, you’ll first have to unplug all your cables. You have to connect them as tight as you can and then try to do it again.
If there is no signal, it is also recommended to check all cables for evidence that they are damaged. You need to look for indications of fraying across the line length.
If you find something not as it should be, the only solution is to replace the problem item with a fresh one. We hope that this will solve the issue for you.
4) Hire A Professional
We cannot suggest that you remove any device unless you have an acceptable level of knowing what you are doing with electronics. Therefore, the only sensible option is to contact experts.
At this point, the issue could probably be caused by a problem affecting the power source. If not, it could be a problem affecting the backlights’ sensors.
In any case, in case, the best method of action would immediately be to send the TV to a qualified specialist to determine and fix the issue without the chance of causing further damage.